Regviz

Texas Instruments /MSP432P401Y /CS /CSCTL3

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CSCTL3

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Texas Instruments/MSP432P401Y/CS/CSCTL3#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (FCNTLF_0)FCNTLF 0 (RFCNTLF_0)RFCNTLF 0 (FCNTLF_EN_0)FCNTLF_EN 0 (FCNTHF_0)FCNTHF 0 (RFCNTHF_0)RFCNTHF 0 (FCNTHF_EN_0)FCNTHF_EN 0 (FCNTHF2_0)FCNTHF2 0 (RFCNTHF2_0)RFCNTHF2 0 (FCNTHF2_EN_0)FCNTHF2_EN

FCNTLF=FCNTLF_0, FCNTHF2=FCNTHF2_0, RFCNTHF2=RFCNTHF2_0, FCNTHF2_EN=FCNTHF2_EN_0, RFCNTHF=RFCNTHF_0, FCNTHF=FCNTHF_0, RFCNTLF=RFCNTLF_0, FCNTLF_EN=FCNTLF_EN_0, FCNTHF_EN=FCNTHF_EN_0

Description

Control 3 Register

Fields

FCNTLF

Start flag counter for LFXT

0 (FCNTLF_0): 4096 cycles

1 (FCNTLF_1): 8192 cycles

2 (FCNTLF_2): 16384 cycles

3 (FCNTLF_3): 32768 cycles
RFCNTLF

Reset start fault counter for LFXT

0 (RFCNTLF_0): Not applicable. Always reads as zero due to self clearing.

1 (RFCNTLF_1): Restarts the counter immediately.
FCNTLF_EN

Enable start fault counter for LFXT

0 (FCNTLF_EN_0): Startup fault counter disabled. Counter is cleared.

1 (FCNTLF_EN_1): Startup fault counter enabled.
FCNTHF

Start flag counter for HFXT

0 (FCNTHF_0): 2048 cycles

1 (FCNTHF_1): 4096 cycles

2 (FCNTHF_2): 8192 cycles

3 (FCNTHF_3): 16384 cycles
RFCNTHF

Reset start fault counter for HFXT

0 (RFCNTHF_0): Not applicable. Always reads as zero due to self clearing.

1 (RFCNTHF_1): Restarts the counter immediately.
FCNTHF_EN

Enable start fault counter for HFXT

0 (FCNTHF_EN_0): Startup fault counter disabled. Counter is cleared.

1 (FCNTHF_EN_1): Startup fault counter enabled.
FCNTHF2

Start flag counter for HFXT2

0 (FCNTHF2_0): 2048 cycles

1 (FCNTHF2_1): 4096 cycles

2 (FCNTHF2_2): 8192 cycles

3 (FCNTHF2_3): 16384 cycles
RFCNTHF2

Reset start fault counter for HFXT2

0 (RFCNTHF2_0): Not applicable. Always reads as zero due to self clearing.

1 (RFCNTHF2_1): Restarts the counter immediately.
FCNTHF2_EN

Enable start fault counter for HFXT2

0 (FCNTHF2_EN_0): Startup fault counter disabled. Counter is cleared.

1 (FCNTHF2_EN_1): Startup fault counter enabled.

Links

()

Register License

Copyright © 2012-2018 Texas Instruments Incorporated - http://www.ti.com/

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of Texas Instruments Incorporated nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data